VSS800

VOCAL SWITCHER

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

8 input, mix output
The 1 U size that it can mount in patch bay
It is bantam jack I/O on front panel
It is with a trim of ± 6dB in each channel
Excellent operability with the remote controller
World wide support power supply

VSS800 is an audio selector of 8 input mix output specifications developed for the purpose of the switching of a vocal caring for sound change.
Sound quality change was not avoided in the switching of the audio by the active circuit using the VCA, but solved this problem using CDS where there were extremely few sound quality changes in VSS800.

“Front access”
If it provides for the front panel in the bantam jack which is the standard of the console as I/O of the audios and mounts it in patch bay, it just patches it and can use it.
Moreover, it can connect the remote controller to front panel, too and does not need the wiring work.

“Mix out”
As for the signal which it input, the channel which made select is output via the mix volume.
In a center click trim on, level adjustment of ± 6dB is possible every each channel.
Moreover, as for the output, it is implemented 2 in parallel.

“Controller”
The controller of VSS800 is configured with 8 select buttons and master cut buttons.
The switching logic can choose 2 select modes without making a mode select.
As for one, the channel is chosen if it presses the button alone.
When another mode presses other buttons while pressing any button, it can choose the multiple channels.
The way of using such as making a vocal double from some points in time is thought about by this function.
Moreover, the selection of multiple channels is possible just to press the multiple buttons at the same time.

“Others”
The AC power supports to 100-240V (switch), and it can use it in all the world, and even the recording in foreign countries does not need an adapter.
As related products of VSS800, there are VSS8881, VSS80 and CSP380.

■ Specifications
•INPUTS: 8CHANNEL,BALANCED, 20kΩ
•INPUTS REFERENCE LEVEL: +4dBu, MAX +24dBu
•INPUTS CONNECTOR: BANTAM JACK
•MIX OUTPUT: BALANCED 50Ω
•MIX OUTPUT REFERENCE LEVEL: +4dBu, MAX +24dBu
•MIX OUTPUT CONNECTOR: BANTAM JACK x2 (parallel)
•CONTROL: CHANNEL to MIX LEVEL ±6dB
•CROSSFADE TIME: Approx.30mS
•INSERTION LOSS LEVEL: <1dB
•FREQUENCY RESPONSE: 20Hz-20kHz ±0.1dB
•THD: < 0.01% at 1kHz REFERENCE LEVEL
•NOISE:< -90dB
•MAINS: 100~240VAC 50/60Hz 10W(MAX)
•MAIN UNIT DIMENSIONS: 482Wx44Hx153D 4kg
•REMOTE UNIT DIMENSIONS: 256Wx30Hx77D 1kg

 CONTROLLER Dsub25-M(#4-40)
01 SW COM 0V  14 LP COM +5V
02 SWITCH C   15 LAMP C
03 SWITCH D   16 LAMP D
04 SWITCH E   17 LAMP E
05 SWITCH F   18 LAMP F
06 SWITCH G   19 LAMP G
07 SWITCH A   20 LAMP A
08 SWITCH B   21 LAMP B
09 SWITCH C’  22 LAMP C’
10 MCUT SW    23 MCUT LAMP
11            24
12            25
13

• Order Information

�