CSP315

2:1 DUAL AUDIO SWITCHER ANALOG, XLR

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

2:1 switcher
Dual
XLR or BNC
Remote control
Analog, digital
Compact

CSP315 is a compact audio switcher of DUAL 2:1 specifications.
It can use it in the analog as 2ch and can use it digitally as 4ch.
It uses a relay for a switch element, and reliable switching is possible.
Additionally, the primary side is bypassed in the power-off.

Input and output
The input of the side that is not chosen is termination by internal resister.
In the case of an analog audio, it is terminated at 600 Ω and, in the case of digital, is terminated at 110 Ω (XLR) or 75 Ω (BNC).

Remote
It switches it by remote control via the GPI port of the DSUB9 pin.
The command can connect a switch, an open collector or relay contact.
Additionally, resistor is built in it in the tarry output and can be directly connected to LED.

Front panel
A panel can implement a select switch with an option.

Others
Please refer about the specifications of the non-standard.

■ Specifications
•INPUT CONNECTOR: XLR3-F, BNC
•OUTPUTS CONNECTOR: XLR3-M, BNC
•GPI: Dsub9-F #4-40
•MAINS: 100VAC 50/60Hz, MAX 3W
•DIMENSIONS: 135Wx51Hx134D 400g

  REMOTE DSUB9-F (rev2)
 01 0V (sw com)     06 +5V
 02 SW1             07 LP1
 03 SW2             08 LP2
 04 SW1+          09 SW2+
 05 ALT

      REMOTE DSUB9-F
 01 0V (sw com)     06 +5V
 02 SW1             07 LP1
 03 SW2             08 LP2
 04 ALT              09 ALT
 05 

• Order Information

(