CSP396

16ch 24bit D/A CONVERTER

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

16 channel D/A converter
24bit, 96kHz
Bar graph, precision VU meter
With ± 10dB trim
Speaker monitor
Highest grade tip
19 inches 2U size

CSP396 is 16 channel D/A converter of the 19 inches 2U size of high quality.
It can monitor each 5 points of analog output by an LED meter.
It allows accurate level setting by an implemented precision VU meter.

“Input and output”
The digital input is BNC connecter.
The analog output is connected at 2 channel blocks in Dsub9 pin connector.

“Sync”
CSP396 works in sync with an applied AES signal.
Fs supports 44.1, 48, 96kHz.

“Reference level”
As for the reference level of the factory, analog output is +4dBu for -20dBFs of the AES input.
It can change it in an internal trim.

“Input format”
It uses only audio data in the internal circuit of CSP396 and does not depend on professional, a consumer format.
In addition, it does not support emphasis.

“Meter”
It can always monitor each output by 5 points of LED meters.
In addition, the signal after the trim of ± 10dB of the channel which it chose is sent to the VU meter and can set an accurate converter level.

“Monitor”
It can confirm the channel which it chose with the speaker.

“Others”
Please consider in addition in 16 channel analog-to-digital converter CSP393 considered to be it by a design for the same development concept.

■ Specifications
•DIGITAL INPUTS: 16 UNBALANCED, 75Ω
•DIGITAL INPUTS REFERENCE LEVEL: -20dBFs, MAX 0dBFs
•DIGITAL INPUTS CONNECTOR: BNC
•ANALOG OUTPUTS: 16, BALANCED, 50Ω
•ANALOG OUTPUTS CONNECTOR: Dsub9-M(#4-40)
•ANALOG OUTPUTS REFERENCE LEVEL: +4dBu, MAX +24dBu
•CONTROL: ±10dB REFERENCE LEVEL (FRONT PANEL)
•Resolution: 24 bits
•Sample Rate: 32-96kHz
•FREQUENCY RESPONSE: 20Hz-20kHz ±0.1dB
•THD: < 0.01% at 1kHz REFERENCE LEVEL
•NOISE: < -90dB
•MAINS: 100VAC 50/60Hz 40W(MAX)
•DIMENSIONS: 482Wx88Hx303D 6kg

 Analog out DSUB9-M
01 1 +	06 1 -
02 1 0	07 2 +
03 2 -	08 2 0
04 2 0	09
05 

• Order Information

e f`