CSP394

DUAL 24bit D/A CONVERTER

[Current Store(ja)] [Selection Guide][System Diagram][Catalog]

24bit, 96kHz
4 channel D/A converter
Super high-quality sound
The Jensen made transformer output
The distribution output of 3 routes
±10dB trim
Bar graph, VU meter
Highest grade tip use
19 inches 1U size

CSP394 is 4 channel D/A converter of the 19 inches 1U size of high quality.
It provides excellent sound by the converter tip of the highest grade that can support to 192kHz with 24bit and fusion with the analog technique of high-quality sound.
It can monitor each 5 points of output level by an LED meter.
In addition, the channel which it can trim can confirm an accurate level by the VU meter.
In addition, it is not necessary to prepare a distributor by addition because it is 3 distribution output with the Jensen transformer.

“Input and output”
The AES input is a BNC connector, and the analog output can connect 8 channels with DSUB connecter together.
Transformer output is a standard, but the transformerless specifications are also available, too.

“Sync”
CSP394 works in sync with an applied AES signal.
It supports 44.1, 48 and 96kHz.

“Reference level”
As for the reference level of the factory, analog output is +4dBu for -20dBFs of the AES input.

“Input format”
It uses only audio data in the internal circuit of CSP398 and does not depend on professional, a consumer format.
It does not also support emphasis.

“Meter”
It can always monitor each output level by 5 points of LED meters.
It implements ± 10dB trim to 2 of the distribution output route and 3.
In addition, the channel which it chose can set an accurate converter level because it can confirm even a VU meter.

“Others”
Please refer about the manufacturing of transformerless specifications.

■ Specifications
•DIGITAL INPUTS: 2 UNBALANCED, 75Ω
•DIGITAL INPUTS REFERENCE LEVEL: -20dBFs, MAX 0dBFs
•DIGITAL INPUTS CONNECTOR: BNC
•DIGITAL INPUTS FORMAT: AES/EBU
•ANALOG OUTPUTS: 3x 1/2, 3×3/4, BALANCED, 50Ω
•ANALOG OUTPUTS CONNECTOR: Dsub25-M(#4-40) x2
•ANALOG OUTPUTS REFERENCE LEVEL: +4dBu, MAX +24dBu
•CONTROL: ±10dB REFERENCE LEVEL (FRONT PANEL)
•Resolution: 24 bits
•Sample Rate: 32-96kHz
•FREQUENCY RESPONSE: 20Hz-20kHz ±0.1dB
•THD: < 0.01% at 1kHz REFERENCE LEVEL
•NOISE: < -90dB
•MAINS: 100VAC 50/60Hz 20W(MAX)
•DIMENSIONS: 482Wx44Hx303D 4.5kg

        “Analog Output 1/2″ (D25-M #4-40)
 1 1-1+ ANALOG OUPUT 1-1 +	14 1-1- ANALOG OUPUT 1-1 -
 2 1-1G ANALOG OUPUT 1-1 GND	15 1-2+ ANALOG OUPUT 1-2 +
 3 1-2- ANALOG OUPUT 1-2 -	16 1-2G ANALOG OUPUT 1-2 GND
 4 2-1+ ANALOG OUPUT 2-1 +	17 2-1- ANALOG OUPUT 2-1 -
 5 2-1G ANALOG OUPUT 2-1 GND	18 2-2+ ANALOG OUPUT 2-2 +
 6 2-2- ANALOG OUPUT 2-2 -	19 2-2G ANALOG OUPUT 2-2 GND
 7 3-1+ ANALOG OUPUT 3-1 +	20 3-1- ANALOG OUPUT 3-1 -
 8 3-1G ANALOG OUPUT 3-1 GND	21 3-2+ ANALOG OUPUT 3-2 +
 9 3-2- ANALOG OUPUT 3-2 -	22 3-2G ANALOG OUPUT 3-2 GND
10				23
11				24
12				25
13

• Order Information

order number description approx. price(US$)
CSP394 24bit, 4ch, 3way output, meter, D/A, 19” 1U $8,727
Tagged with: , , , ,
products
  • new products
Get catalog
The price listed in the pdf catalog. In addition, take precedence over the contents of the print pdf file is updated from time to time.
contact us
drill-down by tags