CSP200

STEREO D/A CONVERTER

[Current Store(ja)] [Selection Guide][System Diagram][Catalog]

Low cost
Compact
Supports professional and a consumer format
8 times oversampling
16bit DA converter
It is most suitable for a line monitor

CSP200 is a compact DA converter supporting digital audio of AES/EBU and the IEC958 format developed for studio and editing room use.

“Converter”
It uses a tip of ∆-∑ modulation technique working in DAC in 384fs.

“FS, emphasis”
In CSP200, the sampling frequency supports 32kHz, 44.1kHz, 48kHz and supports only a state of OFF about the emphasis.

“Solid case”
CSP200 uses a solid aluminum pipe type case of the 3mm thickness and is met strong, hard use for a disturbance noise enough.

“Others”
In addition, please refer about changing the input connecter to XLR.

■ Specifications
[DIGITAL INPUT]
•INPUT: UNBALANCED 75Ω
•CONNECTOR: BNC (XLR3-F)
•REFERENCE LEVEL: -20dBFs or SPECIFIED
•RESOLUTION: 16bit
•DIGITAL FILTER: 8x OVER SAMPLING
•SAMPLING RATE: 32kHz, 44.1kHz & 48kHz
•MASTER CLOCK: 384fs
•EMPHASIS: NO PROCESSED
[ANALOG OUTPUTS]
•OUTPUTS: UNBALANCED 75Ω
•CONNECTORS: RCA PIN JACK
•REFERENCE LEVEL: -10dBu, MAX +10dBu
•FREQ. RESPONSE: 20Hz~20kHz ±1dB
•THD: LESS THAN 0.01% at 1kHz 0dBFs
(20Hz-20kHz DIN AUDIO FILTER)
•NOISE LEVEL: < -80dB at DIGITAL ZERO
•MAINS: 100-120VAC 50/60Hz MAX=4W
•DIMENSION: 150Wx50Hx200D 1kg

• Order Information