CSP916

AUDIO ISOLATOR 8ch

[Current Store(ja)] [Selection Guide][System Diagram][Catalog]

8ch audio isolator
It is most suitable for ProTools system
Jensen made transformer
Power supply unnecessary
19 inches 1U size

CSP916 is an isolator of 1:1 of 8ch using the Jensen made transformer.
It solves the GND noise by the system using DAW.
It is effective for the case that a problem occurs in unbalanced connection though it is balanced output and a case not to be able to extend a cable to by high impedance.
Moreover, it is effective for sound quality because it can cut the high frequency noise.

“Audio input and output”
It can be directly connected to the audio input of CSP916 with the I/O unit of the ProTools system with the Dsub25 connecter of 8ch specifications.
The output does not choose the interconnect equipment with XLR connecter.
The input and output impedance is 600:600.

“Caution of operation”
It is the passive equipment using the transformer, and, please note for the external inductive noises such as power supply transformers.

“GND”
It can completely isolate with a lift switch separating pin1 of the output from GND and can completely shut out the noise caused by the GND.

■ Specifications
•INPUTS: 8ch, 600Ω ,D25-F(#4-40)
•OUTPUTS: 8ch, 600Ω ,XLR3-M
•REF. LEVEL: +4dBu, max=+24dBu
•FREQ.RESPONSE: 20 to 20kHz ±0.1dB
•THD: <0.01% at Ref.Level
•DIMENSIONS: 482Wx44Hx153D 5kg

      Dsub25-F/M Connector Pin List
01 Signal I/O 8 +        14 Signal I/O 8
02 Signal I/O 8 Gnd        15 Signal I/O 7
03 Signal I/O 7 –        16 Signal I/O 7 Gnd
04 Signal I/O 6 +        17 Signal I/O 6
05 Signal I/O 6 Gnd        18 Signal I/O 5
06 Signal I/O 5 –        19 Signal I/O 5 Gnd
07 Signal I/O 4 +        20 Signal I/O 4
08 Signal I/O 4 Gnd        21 Signal I/O 3
09 Signal I/O 3 –        22 Signal I/O 3 Gnd
10 Signal I/O 2 +        23 Signal I/O 2
11 Signal I/O 2 Gnd        24 Signal I/O 1 +
12 Signal I/O 1 –        25 Signal I/O 1 Gnd
13 N.C.

• Order Information

�