(Japanese) FBMX4

FOLDBACK MIX

[Current Store(ja)] [Selection Guide][System Diagram][Catalog]

4 reference variable input
2 routes, for each 3 distribution
Variable output reference
Monitor speaker
Headphone monitor
Level meter
19 inches 1U size

FBMX3 is fold back mixer configured by 4 reference variable input and 2 reference variable output, and, as for the output, 3 distribution is possible each.
It is suitable for not only the line but also the microphone level and can use the input for various applications such as talk back system, the audio distributor as microphone / line mixer.

“Input”
As for the reference level of the XLR connecter input, 3 stages of setting is possible.
1 and 4 can choose -60, -20, +4dBu, and 2 and 3 can choose -20, -10, +4dBu.
It can change the reference level by the designation at the time of the order.

“Routing”
The input signal is sent to the mix amplifier via each mix level and ON button.

“Output”
As for the mix signal, it is output 3 distribution via a reference changeover switch of +4/-20.

“Signal meter”
The signal can monitor input 1-4 and output 1 or 2 in the bar graph of the VU response with a range of the -20 to +3dB.

“Monitoring”
With headphone and a built-in speaker, it switches 4 input and 2 output and can monitor it.

“Power supply”
Please refer about the option of AC power redundancy and the DC12V input.

■ Specifications
•INPUTS: 4, BALANCED, 30kΩ
•INPUTS CONNECTOR: XLR3-F
•INPUTS REFERENCE LEVEL: -60, -20, -10, +4dBu, MAX +24dBu
•OUTPUTS: 6 BALANCED, 50Ω
•OUTPUTS REFERENCE LEVEL: -20, +4dBu, MAX +24dBu
•OUTPUTS CONNECTOR: XLR3-M
•CONTROL: CHANNEL LEVEL, CHANNEL ON, MASTER LEVEL
•MONITOR SOURCE: ALL INPUTS AND OUTPUTS
•HEADPHONES MONITOR: 1/4″ PHONE, MONO IMP. > 50Ω
•MONITOR SPEAKER: MONO, MAX 500mW
•FREQUENCY RESPONSE: 20Hz-20kHz ±0.1dB
•THD: < 0.1% at 1kHz REFERENCE LEVEL
•NOISE: < -80dB
•MAINS: 100VAC/+12VDC 50/60Hz 15W(MAX)
•DIMENSIONS: 482Wx44Hx303D 4kg

• Order Information