SC8016A

MASTER STUDIO CUE SYSTEM

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

1 stereo and 6 mono systems
Low noise, super high-quality sound
60mm CP fader adoption
Headphone x4, earphone x4
2 EXT input
Remote headphone cut
Variable height stand
10 source select (when there is a mother frame)

SC8016A is a headphone monitor system developed for recording studios.
It adopts a discrete circuit to a headphone amplifier and it is clear and provides powerful sound.
The system is configured in a mother frame, power supply, a cue box and provides total monitor environment.

“Mother frame PMS400”
The mother frame can choose 3 stereos, 6 mono and input source of the follow monitor for each cue fader with a source selector.
The chosen signal is sent to the cue box through balance, EQ and a master level.
In addition, the master level of the talkback is implemented, too.
(please request the document of PMS400 additionally.)

“Cue box”
It can monitor 1 stereo system and 6 monaural systems in the cue box.
It is adopting the conductive plastic fader of the 60mm stroke in all channels to allow control with fine balance.
In the standard specifications, it is equipped with 4 headphone, 4 earphones (mono) and EXT input (connected to CUE4, 5).
In addition, a cue cable and headphone are used in the stands for moving with the caster, and the height can do a variable from approximately 700mm to 1,100mm, too.
It can control the cut button of the master module from control room by the cut module of the mother frame.

“Useful EXT input”
The signal input into ‘EXTERNAL TO CUES4,5′ of the headphone jack section and stated jack breaks cue source and the change over from a console and is fed into fader directly.
It monitors a different signal by some cue box oneself if it uses this function and can use it as a headphone amplifier for the monitors of various signals.

■ Specifications
[MOTHER FRAME] PMS400: 483Wx132.5Hx350D, 8.5kg
•MAINS: 100VAC 50/60Hz, 50W max
•INPUTS: STEREO=4,MONO=7,BAL24kΩ,REF=+4dBu
•CHANNEL OUT: BALANCED 33Ω,REF LEVEL=+4dBu
[CUE BOX] SC8016A: 282Wx80H x174D3.2kg
•POWER REQUIREMENTS: ±24VDC 0.5A MAX
•INPUTS: STEREO=1, MONO=6, EXT to CUES=2
BALANCED 24kΩ,REF=+4dBu, MAX +24dBu
•INPUT CONNECTOR: NK27-32S
•OUTPUTS LEVEL: MAX 6.25W at 8Ω
•HEADPHONE: > 50Ω
•CONNECTOR: HEADPHONE(1/4″ 3P PHONE),MONO EARPHONE
•CASCADE OUT: NK27-31S
•CUE CABLE: CC8016A 5m
[POWER SUPPLY] PS8016A: 483Wx132.5Hx350D,7kg
•MAINS: 100VAC 50/60Hz, 750W MAX
•DISTRIBUTION: ±24VDC MAX 15 CUE BOX
•SPARE CUE CONNECTOR: NK27-31S
[POWER SUPPLY] PS8016B: 482Wx44Hx303D,5kg
•MAINS: 100VAC 50/60Hz, 100W MAX
•DISTRIBUTION: Dsub25-F(#4-40) x4

PMS400 Mother Frame

Power supply PS8016A(drive 15 boxes)

Power supply PS8016B(drive 4 boxes)

• Order Information

E 9