GPS715

8:1 9P Serial Switcher

[Current Store(ja)] [Selection Guide][System Diagram][Catalog]

8:1 9P remote switch
Local and remote control
Slave remote output
19 inches 1U size

GPS715 is a 9P serial selector of the 8:1.
It works by the switch of the main frame, a remote box and the tarry such as video switchers.

“Input-output”
The input connecter is DSUB9P female and the output connecter is DSUB9P male and it is directly connected and, in the case of system check, a trouble, can bypass the cable.

“Switching”
It is replaced via a period of all OFF of one second when it presses each 1-8 switches.
The tarry indication turns on when it pressed the switch.
In addition, it is all OFF by a prohibition logic of the multiplex push when it presses the multiple switches.
The first button is chosen at the time of the power-up.
In addition, it can use even an application except the 9P remote because it is all pin switches.

“Others”
Optional remote box ‘RMS283′ can be directly connected to a remote connecter.
In addition, please refer about the manufacturing of the system switcher of different specifications and the biya remote control panel.

■ Specifications
•INPUTS: 8
•INPUT CONNECTOR: Dsub9-F (#4-40)
•OUTPUT: 1
•OUTPUT CONNECTOR: Dsub9-M (#4-40)
•REMOTE: Dsub25-F (#4-40)
•REMOTE LINK: LAMP OF SELECT SW
•ALL OFF PERIOD: approx 1 sec
•SWITCHING ELEMENT: RELAY
•SWITCHING PIN: ALL
•MAINS: 100VAC 50/60Hz MAX=10W
•DIMENSIONS: 482Wx44Hx303D 4kg

 GPS715 "9P I/O" D9-F/M(#4-40)
 1 pin 1              6 pin 6
 2 pin 2              7 pin 7
 3 pin 3              8 pin 8
 4 pin 4              9 pin 9
 5 pin 5

 GPS715 "REMOTE" DSUB25-F
 01 SW COM 0V	     14 LP COM +5V
 02 SW 1	     15 LP 1
 03 SW 2	     16 LP 2 
 04 SW 3	     17 LP 3
 05 SW 4	     18 LP 4
 06 SW 5	     19 LP 5 
 07 SW 6	     20 LP 6
 08 SW 7	     21 LP 7
 09 SW 8	     22 LP 8  
 10 	             23 
 11 	             24 
 12 	             25 
 13 

• Order Information

re(