CSP354

12ch LEVEL CONTROLLER

[Current Store(ja)] [Selection Guide][System Diagram][Catalog]

12ch monitor controller
Super low noise, broadband
Level control without the tracking error
Remote control support
19 inches 2U size

CSP354 is a monitor controller of 12ch specifications developed as master controller of the multichannel monitor.
By the adoption of the tip for exclusive use of a thing of a digital control method, tracking error disappeared and was able to eliminate a change of unstable sound localization.
It also realized accurate 0.5dB step attenuation and high SN, low distortion, wide dynamic range.

“Monitor”
It can set the master level without tracking error from +10dB to infinite repetition in 0.5dB resolving power precisely.

“Cut”
When it is cut remote with a GPI port of the rear panel, CUT STATUS of the front panel turns on.
Even a switch of the front panel can validate CUT with an option.

“Remote”
It can use a cut and the remote volume with a GPI port.
The remote cut input can connect contact or the voltage.
The remote volume can be directly connected to the volume without using a special component.
These become the OR working with the main frame, and, as for the remote volume, it is with the working like the case that paired with a console in a VCA group.

■ Specifications
•MONITOR INPUTS : 12, XLR3-F
•ALL INPUTS IMPEDANCE : 24kΩ, REF=+4dBu MAX=+24dBu
•ALL OUTPUTS IMPEDANCE: 50Ω, REF=+4dBu MAX=+24dBu
•MONITOR ATT: 0.5dB STEP +10 ~ -95.5dB ~ ∞
•FREQUENCY RESPONSE: 20~20kHz ±0.1dB
•THD: < 0.01% at 1kHz, REF LEVEL (20~20kHz unweighted)
•NOISE: < -90dBu (20~20kHz unweighted)
•GPI PORT: Dsub9-F(#4-40) 5~24VDC
•MAINS: 100VAC 50/60Hz, MAX 30W
•DIMENSIONS: 482Wx88Hx302D, 5kg

   GPI DSUB9-F
01 GND          06 +5V
02 EXT CUT +    07 EXT CUT -
03 EXT CW       08 EXT WP
04 EXT CCW      09
05

• Order Information

>