[Current Store(ja)][Selection Guide][System Diagram][Catalog]

Microphone built-in XLR plug
Phantom power support
Simple setting
Omni direction

CSP906 is the microphone plug which included an electret condenser microphone in XLR plug.
It can be directly connected to microphone preamplifier and a microphone panel connecter and is most suitable for a purpose such as communication or simple sound collection.
Moreover, it can set the low cut filter with an internal jumper, too and is effective when air conditioner noises are the problem.
It works in 48V phantom power and can make use in various scenes such as a studio, broadcast, the live recording.

It can extend the male connecter of the general XLR3 pin with a cable.

“Low filter”
When it takes off one screw and removes an internal jumper plug, a low cut filter of 250Hz becomes effective.
It has been set and can ship it.

It can use it in a wide purpose in supporting to phantom power from 9V to 52V.

■ Specifications
•ELEMENT: Electret Condenser
•DIRECTIVITY: Omnidirectional
•POWER REQUIREMENT: 9 to 52V phantom power
•SENSITIVITY: -46±3dB (0dB=1V/Pa at 1kHz)
•FREQ.RESPONSE: 20Hz to 16kHz ±3dB
•SN: >60dB (A-weighted)
•BASS ROLLOFF FILTER: 250Hz, -10dB at 50Hz
•DIMENSIONS: 19x111L, 60g

• Order Information

order number description approx. price(US$)
CSP906 XLR plug with mic $44
Tagged with: , ,
  • new products
Get catalog
The price listed in the pdf catalog. In addition, take precedence over the contents of the print pdf file is updated from time to time.
contact us
drill-down by tags