CSP934

Pro to Consumer

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

Interface of professional to consumer equipment
It is most suitable for conversion of the -10 from +4
Jensen made transformer use
Compact

CSP934 is +4 level of the professional equipment using the Jensen made transformer and 4ch conversion transformer box of the -10 of the consumer equipment.
It can cut the ham noise caused by the GND loop and the high frequency noise, too and is extremely useful for sound quality.
The small box shape allows the use at every place of a studio or the broadcast scene.

“Converter”
About 14dB is to step down and converts professional equipment and a level of the consumer equipment with a transformer of 4:1.
When it uses it to the opposite direction, step-up of about 10dB is possible, but not only step-up is not when it does not drive in sending out impedance less than 50 Ω, but also the frequency characteristic turns worse extremely.

“GND”
When the noise caused by the loop occurs, it can cut an earth loop with an internal GND lift switch.

“Caution of operation”
It is the passive equipment using the transformer, and, please note for the external inductive noises such as power supply transformers.

“Others”
Please refer about the manufacturing of various equipment using the Jensen transformer.

■ Specifications
•PRO INPUTS: XLR3-F
•PRO OUTPUTS: XLR3-M
•PRO IMPEDANCE: 34kΩ at 50Ω source with 47kΩ Load
•CONSUMER OUTPUTS: RCA
•CONSUMER IMPEDANCE: 225Ω at 50Ω source with 47kΩ Load
•REFERENCE LEVEL: +4dBu, max=+24dBu
•FREQ.RESPONSE: 20 to 20kHz ±0.5dB
•THD: <0.01% at Ref.Level
•DIMENSIONS: 150Wx50Hx100D 1kg

• Order Information