MP463

MONITOR UNIT WITH VU

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

Speakers and headphones
4 stereo system XLR input
VU meter
Selected out
600 Ω line support
19 inches 1U size

MP463 is a monitor unit of 19 inches 1U size providing a stereo speaker and headphone monitor function.
It chooses the stereo source of 4 systems and can monitor it and can use it as a line selector because there is the select output.

“Input-output”
The input-output is general XLR type connector, and a headphone jack is 1/4″ stereo jack too.
The input and output connectors is what have been connected directly with, and a signal chosen with a source selector in the output is just output.

“Monitor”
While it monitors it in a stereo speaker, it is cut when it places headphone and is replaced by headphone.

“Meter”
The VU meter indicates a signal chosen with a source selector.
The standard reference level is +4dBu, but the change is also possible to -10, -20, too.　
(at the time of an order)

“Others”
Please consider as related products of MP463 in addition in MP460A of 2 system input, MP462A only for monitor function.

■ Specifications
•INPUTS: STEREO x4, BALANCED, 36kΩ / 600Ω (select on rear panel)
•INPUT CONNECTOR: XLR3-F
•INPUTS REFERENCE LEVEL: +4dBu, MAX=+24dBu
•OUTPUTS: BALANCED, 50Ω
•OUTPUT CONNECTOR: XLR3-M
•OUTPUTS REFERENCE LEVEL: +4dBu, MAX=+24dBu
•FREQ.RESPONSE: 20 to 20kHz ±0.1dB
•THD: <0.01%
•EIN: <-90dB
•HEADPHONES: >50Ω
•MAXIMUM OUTPUT LEVEL 500mW, <1%
•MAINS: 100~120VAC 50/60Hz MAX 15W
•DIMENSIONS: 482Wx44Hx303D, 4kg

• Order Information

9�