CSP107A

PROGRAM METER

[Current Store(ja)] [Selection Guide][System Diagram][Catalog]

4 stereo input
Selected output
Precision VU meter unit
Remote possible
Individual trim
HP monitor
19 inches 2U size

CSP107A is a VU meter unit of 4 stereo channel.
It provides by main program meter and the EXT meter which it can switch.
It implements sifam made to a VU meter unit, and, as for this component, the adoption results with the large size console are a lot of and highly precise.
In addition, the maintenance-free LED light is mounted on each meter.

“Audio input and output”
Audio input of CSP107A is balance type XLR type connecter, and the reference level is +4dBu.
Because it is connected direct, the through output can use which as input.
In addition, in selected out, the signal that EXT1 3 which it chose was buffered is output.

“Reference level”
The reference level of the VU meter is a trim located beside each input connecter of the rear panel, and adjustment is possible to -2dBu to +10dBu.
Because every each input can set it, it changes different reference level equipment and can indicate it.

“Monitor”
It can monitor source choosing by EXT meter of the front panel with stereo headphone.

“Remote”
It is possible for external control to switch of the front panel via a remote connecter of the rear panel.
It can turn off EXT meter in this port.

■ Specifications
•INPUTS: 1-4, 20kΩ / 600Ω, REF=+4dBu, MAX=+24dBu
•INPUT CONNECTOR: XLR3-F
•SELECTED OUTPUT CONNECTOR: XLR3-M
•REFERENCE: +4dBu
•TRIM: -2dBu~+10dBu
•FREQUENCY RESPONSE: 20Hz~20kHz +/-0.5dB
•METERS: SIFAM AL29WF Internal LED Lamp
•REMOTE CONNECTOR: D15-F (#4-40)
•MAINS: 100VAC 50/60Hz MAX=6W
•DIMENSIONS: 438Wx88Hx153D, 5kg

   REMOTE DSUB15-F(#4-40)
01 SW COM        09 LP COM +15V
02 OFF SW        10 OFF LP
03 EXT-1 SW      11 EXT-1 LP
04 EXT-2 SW      12 EXT-2 LP
05 EXT-3 SW      13 EXT-3 LP
06               14
07               15
08

• Order Information

P