CSP102A

PROGRAM METER 2ch

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

Stereo VU meter
Throughout
600 Ω compatible
Sifam precision VU meter
Tilt stands
Maintenance-free illumination
-20 to +20dBu reference level
19 inches 2U half

CSP102A is VU meter box using the sifam precision meter.
It provides by throughout XLR balance input on and can be available for various applications in a studio or the live.

“VU”
The VU meter implements a sifam made meter used in major large-sized consoles.
Additionally, 0VU is calibrated in factory by +4dBu and can change it in the range of -20dBu to +20dBu in a trim of the rear panel.

“Input and output”
The input of CSP102A is a female connecter of XLR3, and the throughout is XLR3 male.
Even if this maile and female connecter inputs it into whichever because it is connected directly, it can use it.
In addition, it can support the 600 Ω line with a switch of the rear panel.

“Meter”
The meter used by default in CSP102A is AL29WF, but there is CSP102A32 of CSP102AF type of the precision and the larger-scale R32AF type more.

“Others”
It can adjust it to the angle that it is easy to see by the tilt stands attached to the bottom of CSP102A.
It is possible for the change to name of the panel depending on specifications, but plate-making charges are necessary separately.
It adds a reference level select switch and can also make the type to allow a variable with front panel in a vari mode.
In addition, AL29WF and the R32AF type are changed to AL29WF, AL39WF at a stock limit.

■ Specifications
•INPUTS: BALANCED
•INPUT IMPEDANCE: 20kΩ / 600Ω
•INPUT CONNECTOR: XLR3-F x2
•THRU OUT CONNECTOR: XLR3-M x2
•REFERENCE LEVEL: +4dBu (1.228V), MAX=+24dBu
•FREQUENCY RESPONSE: 20~20kHz ±0.5B
•METERS: SIFAM AL29WF x2
•ADJUST: METER 0VU ADJUST -20dBu~+20dBu ON REAR PANEL
•METER LAMP: AMBER LED
•MAINS: 100-120VAC 50/60Hz 15W (200-240V OPTIONAL)
•DIMENSIONS: 220Wx88Hx102.6D, 2kg

• Order Information

}�