CSP150A

PROGRAM METER 2ch

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

Dual meter system of bar and needle
VU/PEAK switching
3 stages of reference level setting
All mode remote control possibility
Throughout
Maintenance-free illumination
XLR and RCA input
19 inches 2U size

CSP150A is a stereo program meter of the 2 U rack mount type developed for studio and editing room use.
It did the bar graph that a needle-type VU meter and VU/PEAK response switching were possible with a combined dual meter system for the purpose of the support to every program source.

“VU meter”
It adopts field-proven sifam on a needle-type VU meter and has sure reliability, and it is possible for the change of the reference level by a ‘+8′ button.
It is 0VU=+4dBu by default.
It is the 0VU=+8dBu (-4dB) when it presses the button once, and a color of the LED changes when it continues pressing it, and it becomes 0VU=+14dBu (-10dB).
And it returns to 0VU=+4dBu if it presses the button again.
By this function, it can read the level that 10dB is higher in than normal.

“Bar graph”
It can indicate -40dB to +16dB by LED use with high visibility in bar graph.
(as for the actual level -36dBu to +20dBu)
It provides for VU/PEAK by a peak hold function and can hold a maximum level by ‘HOLD’ button.
It performs Hold of a peak with the ‘AUTO’ mode for approximately 2 seconds and is reset automatically.
In the case of OFF, ‘AUTO’ and ‘HOLD’ hold a peak both.
In addition, the reference level is the 0VU=-6dBu (-10dB) when it continues pressing the ‘VU’ button for approximately 2 seconds and returns to 0VU=+4dBu if it presses the button again.
In other words 10dB can up by indication.

“Remote control”
As for each mode switch (+8, VU, PEAK, RESET, AUTO, HOLD) in the front panel, the control from switch box and external equipment is possible via a remote connecter of the rear panel, too.

“Others”
The audio in with the throughout can use XLR and an RCA connecter without a switch, and, in addition, CSP100 of the desktop of the specifications also available.

■ Specifications
•BALANCED INPUTS: 43kΩ, REF=+4dBu,MAX=+24dBu,XLR3-F
•UNBALANCED INPUTS: 10kΩ, REF=-10dBu,MAX=+10dBu,RCA
•VU METER UNIT: SIFAM AL29WF
•VU FUNCTION: REFERENCE SELECT +8, +14
•BAR GRAPH: 32POINT LED DISPLAY
•BAR GRAPH DISPLAY RANGE: -40dB to +16dB
•BAR FUNCTION: -10,VU/PEAK,AUTO,HOLD, RESET
•FREQUENCY RESPONSE: 20Hz~20kHz +/-0.5dB
•REMOTE CONTROL: FUNCTION CONTROL, D25-F(#4-40)
•MAINS: 100VAC 50/60Hz MAX=15W
•DIMENSIONS: 482Wx88Hx303D 6kg

   REMOTE D25-F(#4-40)
01 +8 SW        14 +8 LP
02 -10 LP       15 RESERVED
03 RESERVED     16 VU SW
04 VU LP        17 +10 LP
05 PEAK SW      18 PEAK LP
06 RESET SW     19 AUTO SW
07 AUTO LP      20 HOLD SW
08 HOLD LP      21 RESERVED
09 RESERVED     22 RESERVED
10 RESERVED     23 UNUSED
11 +15V         24 +15V
12 0V           25
13 -15V

• Order Information

�