CSP202

AES VU METER 2ch

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

AES/EBU 2ch VU meter
Highest grade large size meter adoption
Balance, unbalance compatible
32k to 192kFs compatible
-20dBFs to 14dBFs adjustable
Maintenance-free illumination

CSP202 is a digital program meter of 2ch specifications.
It implements sifam made to a VU meter unit, and, as for this component, the adoption results with the large size console are a lot of and highly precise.
In addition, it is beautiful and maintenance-free bulb-colored LED is mounted for the illumination of each meter.

“Audio input and output”
CSP202 implements DSUB25 of 110 Ω balance specifications and the BNC connector of 75 Ω unbalance specifications in audio input and the through output.
It recognizes the connecter which an input signal was connected to automatically.
(simultaneous connection, impossible)
In addition, it can use either of AES/EBU and the SPIDIF in the consumer not being different from professional in audio data.

“Trim”
The reference level of the VU meter is a trim located in the rear panel, and adjustment is possible in the range of -20dBFs to 14dBFs.
In addition, the standard reference level is -20dBFs=+4dBu=0VU.

“About Fs”
It follows it to 32-192kHz automatically, but, please do not change it during a working as much as possible.
When you change it, please power up again.

“Others”
It is possible for a reference level and the panel name to customize, and, in that case, plate-making charges are necessary separately.

■ Specifications
•BALANCED INPUT: 110Ω, XLR3-F, 0.5~5Vpp
•UNBALANCED INPUT: 75Ω, BNC, 0.5~5Vpp
•INPUT SIGNAL FORMAT: AES3,AES3id, SPDIF
•RESOLUTION: 16bit-24bit
•SAMPLING RATE: 32~192kHz
•REFERENCE LEVEL: -20dBFs~-14dBFs (Default= -20dBFs)
•FREQUENCY RESPONSE: 20Hz-20kHz ±0.5dB
•MAINS: 100VAC 50/60Hz MAX 5W
•DIMENSIONS: 223Wx88Hx153D, 2.5kg

• Order Information

�