CSP162

SIGNAL PROCESSOR

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

Mix in 8 channel source of high quality
It is most suitable to gather up microphone preamplifier
It is input signal indicator in each channel
19 inches 1U size
All the world voltage support

It is the signal processor which was developed CSP162 mixes the source of 8 channels without losing original sound entirely, and to output it with a stereo.
The ch1-4 mixes it with an odd and an even channel, and only 5-8 is sent to a master via panpot.
It makes a signal pass simple, and CSP162 aiming at ideal mix is most suitable though it gathers up multiple microphone preamplifier.

“Input”
The input of CSP162 is a connecter of the XLR type.
It mixes 1, 3 channels at 1:1 and is sent to L of the master, and, likewise, 2 and the 4 channel are sent to R of the master, too.
Additionally, 5-8 channels are sent to a master via panpot.
An input signal of 1-4 channels is that it is sent to a master without going via level or Pan control entirely, and ideal mix not to lose original sound at all is possible.

“Master”
Left and right is independent in masters, and level control is possible to 0 to infinite consecutively.

“Others”
In signal indicator of the front panel, it can confirm the input signal which is higher than -16dBu (-20VU).
Additionally, CSP162 can support in AC power of all the world of 100V – 240V by a switch switch of the rear panel.

■ Specifications
•INPUTS IMPEDANCE: 24kΩ BALANCED
•INPUTS REFERENCE LEVEL: REF=+4dBu, MAX=+24dBu
•INPUTS CONNECTOR: XLR3-F
•SIGNAL INDICATOR Threshold: -16dBu
•OUTPUTS CONNECTOR: XLR3-M
•OUTPUTS CHANNEL: LEFT(ODD) AND RIGHT(EVEN)
•OUTPUTS IMPEDANCE: 33Ω BALANCED
•OUTPUTS REFERENCE LEVEL: REF=+4dBu, MAX=+24dBu
•OUTPUTS CONNECTOR: XLR3-M
•MIX GAIN: 0dB
•FREQUENCY RESPONSE: 20~20kHz ±0.1dB
•THD: < 0.01% at 1kHz, REFERENCE LEVEL
•NOISE LEVEL: < -90dBu
•MAINS: 100-240VAC 50/60Hz, MAX 20W
•DIMENSIONS: 482Wx44Hx303D, 4kg

• Order Information