CSP190

OSC UNIT

[Current Store(ja)] [Selection Guide][System Diagram][Catalog]

Low distortion analog oscillator
1kHz, the +4/-20dBu output
Remote control possibility
19 inches 1U size

CSP190 is 19 inches 1U size and is low distortion analog oscillator with the output of dual of +4dBu and -20dBu.
It is most suitable as oscillator for reference signals such as audio equipment or video equipment.

“Control”
It can do ON/OFF control of oscillator by switch of front panel or remote control.
In addition, fine adjustment of output level is possible in trim of rear panel, too.

“Output level”
+4 output is variable possibility in trim of rear panel in the range of +4dBu from 0dBu.
The -20dBu output is variable possibility in the range of about ± 6dB.
In addition, please execute setting of output level after warm-ups more than 30 minutes.

“Others”
Please refer about change of standard frequency 1kHz.

CSP190 updated to CSP290

■ Specifications
•ELEMENT: Electret Condenser
•OUTPUT CONNECTOR: XLR3-M
•OUTPUT IMPEDANCE: <600Ω
•DIRECTIVITY: Omnidirectional
•POWER REQUIREMENT: 9 to 52V phantom power
•CURRENT CONSUMPTION: <3mA
•SENSITIVITY: -46±3dB (0dB=1V/Pa at 1kHz)
•FREQ.RESPONSE: 20Hz to 16kHz ±3dB
•SN: >60dB (A-weighted)
•BASS ROLL OFF FILTER: 250Hz, -10dB at 50Hz
•DIMENSIONS: 19x111L, 60g

   CSP190 "REMOTE" D9-F(#4-40)
 1 REMOTE SWITCH +        6
 2 REMOTE SWITCH -        7
 3 +15V SUPPLY            8
 4 15V COMMON             9
 5

• Order Information

P