CSP230

SPDIF FORMAT CONVERTER

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

S/PDIF format converter
It converts professional to a consumer format
2 route output of coaxial and the optical
Compact
Low price

When it copies it from professional equipment to consumer product in a studio, is it not a problem?
CSP230 converts the professional format of the AES/EBU digital audio signal into IEC958 (S/PDIF) consumer format.
It provides 2 routes each, and the output can copy coaxial and optical up to 4 simultaneously.

“Format conversion”
It detects clock and emphasis bit of an AES/EBU signal input with XLR connecter.
It follows applied information regarding sampling frequency and the emphasis, and the output format of the others is set in standard S/PDIF format, and can change it with an internal switch.
In addition, the users bit just outputs input information.

“Input signal”
In the case of the poor signal which a case not to contain the clock precision that it detected within +/-400ppm and internal PLL cannot lock, the output is cut.

“SCMS”
In consideration of the use in the professional studio, the flag about the SCMS is set in a mode admitting copying in an original generation.
In addition, the category of the factory is set in GENERAL.

“Others”
Please use CSP301 for the conversion from a consumer to a professional format.
In addition, please consider in addition in CSP300BT where CSP300BX of 8 AES/EBU distributors, 8 optical distribution are possible.
(the digital audio signal cannot connect in parallel.)

CSP301 is a product for professional to use in a recording studio, a broadcasting station and postproduction.
Therefore, do not use it for the purpose of violating the SCMS.

■ Specifications
•SIGNAL INPUTS: AES/EBU
•INPUT CONNECTOR: IMPEDANCE:110Ω,XLR3-F
•COAXIAL OUTPUT: IMPEDANCE:75Ω,RCA PIN JACK x2
•OPTICAL OUTPUT: TOS-LINK TOTX173 x2
•RESOLUTION: 16bit-24bit
•SAMPLING RATE: 44.1kHz, 48kHz
•MAINS: 100-120VAC 50/60Hz MAX 2W
•DIMENSIONS: 150Wx54Hx170D, 0.8kg

• Order Information

;
}@