CSP336

6:2 MATRIX AMP

[Current Store(ja)][Selection Guide][System Diagram][Catalog]

6×2 audio matrix
It is with an input and output trim
Low noise, high-quality sound
2 stages of selectable output level
VU meter
Headphone monitor
Design with high visibility
19 inches 1U size

CSP336 is the audio matrix amplifier which implemented 6 channel input and dual output.
The panel design with high visibility allows that it does setting and the confirmation that are in a state quickly.
It can confirm the output with headphone with a VU meter.
The application by various purposes such as the distribution of the general audio or the distribution of the incom system is possible.

“INPUT”
It comes with a variable in the range of infinity to +10dB in matrix source level in the input section of 6 channel.

“MATRIX”
It can assign the matrix output of the dual each source independently.
The assigned signal is mixed and is output via output level control.
It is possible for a variable to output level in the range of infinity to +10dB.
There are A and B in each matrix output, and the B output can change the reference level with a switch of the rear panel.

“Output monitor”
It can confirm the matrix output with headphone and VU meter.
The VU meter indicates the level after the matrix output trim.

“Others”
Please refer about the manufacturing of the matrix amplifier of different specifications.

■ Specifications
•SOURCE INPUTS: 6
•INPUTS IMPEDANCE: BALANCED, 1kΩ~2kΩ
•INPUTS LEVEL: REF=+4dBu, MAX=+24dBu
•INPUTS CONNECTOR: XLR3-F
•MATRIX OUTPUTS: 2
•OUTPUTS IMPEDANCE: BALANCED 50Ω
•OUTPUTS LEVEL: REF=+0dBu, MAX=+24dBu
•OUTPUTS CONNECTOR: XLR3-M
•FREQUENCY RESPONSE: 20Hz~20kHz ±0.1dB
•THD: < 0.03% at 1kHz REFERENCE LEVEL
•MAINS: 100VAC 50/60Hz, 15W MAX
•DIMENSIONS: 482Wx44Hx303D, 4kg

• Order Information